DP05 All-In-One Water-Based Floor Coating

✓ 3-in-1 Formula: Integrates primer/finishing coat/clear coat functions

✓ Rapid Application: 2 coats achieve full coverage (4h recoat time)

✓ Eco-Safe: Zero VOC, odor-free during curing

✓ Multi-Surface Use: Adheres to indoor/outdoor concrete

Technical Superiority:

Adhesion: ≥1.5MPa bond strength

Load Capacity: Supports ≤0.5 tons/m² (Shore D ≥60)

Chemical Resistance: Passes 48h 10% H₂SO₄ / 72h 20% NaOH tests

Cure Efficiency: Walkable in 72h (7-day full cure)

Coverage: 0.25kg/m² per coat

1. Surface Preparation

Cleaning: Ensure the substrate is clean, dry, and free of oil, grease, dust, dirt, and ponding water.

Repairing: Fill all cracks, pits, and surface defects to achieve a smooth, level substrate.

Surface Grinding: This creates a texture for optimal paint adhesion.

New Concrete Floors: Allow new concrete to cure completely before application (minimum 10 days under summer conditions, 20 days under winter conditions).

2. Application

Primer:

Apply primer evenly across the prepared surface.

Allow primer to dry for a minimum of 2-4 hours before proceeding.

DP05 All-In-One Water-based Floor Coating:

Thoroughly mix and apply first coat thinly and evenly with a roller.

Allow 4 hours drying time (until touch-dry).

Apply second coat thinly and evenly.

3. Curing & Protection

Keep the surface dry and avoid any water contact for 7 days after application.

Protect from heavy traffic, equipment, or concentrated loads for 7 days to allow the material to cure fully.