EN
- Overview
- Advantages
- Applications
- Specifications
- Recommended Products
Overview
DP08 Solvent-Free Epoxy Color Quartz Self-Leveling Floor Coating
Industrial-Grade Decorative Flooring Solution
URBVO's DP08 revolutionizes industrial flooring with its advanced solvent-free formula infused with premium color quartz aggregates. Designed for demanding environments like factories, warehouses, and commercial centers, this system delivers unparalleled durability while creating visually striking surfaces.
Advantages
✓ Decorative Excellence: Vibrant quartz sand particles form customizable patterns and rich textures (≥140mm flowability), elevating spaces beyond functional requirements.
✓ Extreme Durability: Withstands heavy forklift traffic (compressive strength ≥45MPa) and resists abrasion (≤0.03g/500r wear loss).
✓ Chemical Immunity: Impervious to oils, acids (10% H₂SO₄), and alkalis (20% NaOH) - ideal for pharmaceutical/chemical plants.
✓ Hygienic & Safe: Zero VOC emission; slip-resistant finish prevents workplace accidents.
Technical Superiority:
Rapid cure: Walkable in 48hrs, full operation in 7 days
Seamless application: Self-leveling properties eliminate joints where bacteria thrive
Applications
1. Surface Preparation
Cleaning: Ensure the substrate is clean, dry, and free of oil, grease, dust, dirt, and ponding water.
Repairing: Fill all cracks, pits, and surface defects to achieve a smooth, level substrate.
Surface Grinding: This creates a texture for optimal paint adhesion.
New Concrete Floors: Allow new concrete to cure completely before application (minimum 10 days under summer conditions, 20 days under winter conditions).
2. Application
Primer:
Apply primer evenly across the prepared surface.
Allow primer to dry for a minimum of 2-4 hours before proceeding.
DP08 Solvent-Free Epoxy Self-Leveling Colored Quartz Floor Coating:
Thoroughly mix Part A and Part B of the self-leveling compound until homogeneous.
Pour the mixed compound onto the floor and spread it evenly using a trowel or squeegee.
Finally use a defoaming roller to roll back and forth for defoaming treatment.
Complete application within the 30-minute pot life period.
3. Curing & Protection
Keep the surface dry and avoid any water contact for 7 days after application.
Protect from heavy traffic, equipment, or concentrated loads for 7 days to allow the material to cure fully.
4. Proven Applications:
● Automotive plants (resists tire marks)
● Food processing facilities (non-porous surface)
● High-traffic malls (maintains gloss under 10,000+ daily footsteps)
Specifications
| DP08 | Part A(kg) | PART B (curing agent)(kg) | coverage area(m²) |
| Sample | 0.7 | 0.1 | 0.5 |
| Standard | 21 | 3 | 15 |
